General

Topic	Replies	Views	Activity
About the General category	0	192	April 18, 2020
Troubleshooting an RB-x30 Response Pad	0	13973	November 4, 2009
Welcome Note	0	14202	September 8, 2006
E-Prime 3.0 does not recognize scanner triggers from Lumina 3G controller lumina-controller	1	29	January 14, 2022
Scanner trigger problem	3	54	December 23, 2021
problems with Cedrus response pad communicating with PsychoPy via pyxid windows , psychopy , pyxid , fmri	4	5355	December 8, 2021
pyxid: two responses per button press	2	2156	December 8, 2021
E-prime and parallel or serial port c-pod	1	91	October 4, 2021
NBS Presentation: get scanner trigger and behavioral response from Lumina lumina , presentation , trigger , behavior	8	5783	July 12, 2021
RB-830 set up	4	5432	February 27, 2017
Xidon compatibility with OS X 10.6.8 compatibility , stimtracker	2	166	February 26, 2021
Installing RB530 on Windows 10 64bit	3	413	February 2, 2021
Stimtracker could not detect usb connection via D2XX stimtracker , psychopy	1	297	September 3, 2020
StimTracker Produces High Amp Noise on ANT	7	3976	December 12, 2019
Phantom responses being recorded by Lumina 3G (using PsychoPy)	0	284	November 17, 2019
Recommended serial port hardware (will this work?)	1	605	June 4, 2019
Lumina Line 4 Button pad button issue	1	513	April 20, 2019
Response Box timeout settings and framerate limitations. response-box , timing , support , framerate	1	603	February 12, 2019
Lumina as keyboard no response	4	1052	December 17, 2018
Trouble Sending Triggers From E-Prime with C-Pod eeg , e-prime , c-pod , ant-neuro , triggers	3	794	December 13, 2018
Signal reception eprime , lumina	3	693	December 13, 2018
Settings for continuos button press lumina , hold , button , visual-analogue-scal	6	1661	November 21, 2018
Sending event markers in E-prime to Nirx through cedrus c-pod e-prime , trigger , c-pod , fnirs , nirx	1	973	November 12, 2018
Performance issues with Response Pad RB-740 and Superlab hardware , rb-740 , resolution-timer , superlab-505	6	1566	September 21, 2018
set up	6	967	September 13, 2018
Artifacts in EEG recoding from button press	15	9912	June 18, 2018
Light sensor not detected	2	1246	May 11, 2018
StimTracker Trigger Artifact in g.tec g.USBamp (v3)?	1	1037	May 4, 2018
SuperLab 6 and X6 can't recognize 830	0	1048	January 24, 2018
Stim Tracker and pyxid	0	860	January 23, 2018