define buttoms for using in e-prime


I did all the installations that I had to. Now I’d like to use the bottum box to register answers and reponse time in an e-prime experiment. For that, I should be able to define the buttons. How can I do this?

Thanks for your help!

I am not familiar with E-Prime but it comes with an SRBOX sample that you can use. The important thing to remember is that our response pads work with E-Prime by emulating the PST Serial Response Box that PST makes. So from within E-Prime, you need to set things up as if you were doing it for that box.

You also need to make sure that our response pad is set to operate in SRB mode by flipping the right switch as described on this page: