No announcement yet.

Using StimTracker to mark an event in superlab

  • Filter
  • Time
  • Show
Clear All
new posts

  • Using StimTracker to mark an event in superlab

    I was wondering if it would be possible to use StimTracker to send an event marker (from the light sensor) to trigger an event in Superlab. I am using EyeWorks software with an eye tracking device and need to use superlab for the purpose of gathering reaction time data in addition to the eye tracking data. I was thinking that the light sensor could detect the onset of a particular event on the screen and this could trigger an event marker that Superlab would then use for timing of key press purposes. I won't be using superlab as a presentation software in this case, but only for the sake of gathering key press reaction time data relative to particular screen events. Thank you.

  • #2
    StimTracker is not capable of doing this, however we are releasing a new generation of our response pads in 2 months that will be able to achieve this. They will have lightsensor input that is capable of resetting the RT timer and all subsequent responses will be time stamped accordingly.


    • #3
      Response pads that will accept light sensor input?

      Hi. I just wanted to be sure there would be an email or other announcement when the response pads that will accept light sensor input are available?


      • #4
        Hi Beatrice, the announcement went out today: