Keyboard mapping for Riponda S model

1

I’m trying to use the Riponda S model with Inquisit ver 5. It used to be compatible with RB series, but with the new Riponda model, xid configuration is no longer working.

So, as an alternative approach, I tried to configure the Riponda to keyboard mode. I switched the ‘1’ button down, and reset, but when I press all 5 buttons, they are not input as a typical keyboard input. All buttons are mapped to “ENTER” within the Inquisit; and if I press all 5 butons within “Notepad” text file, it is written as:

a p 3 19925
a r 3 20042
a p 4 21119
a r 4 21204
a p 1 22176
a r 1 22321
a p 2 24393
a r 2 24477
a p 5 30779
a r 5 30860

I upgraded the firmware to 2.2.9 (says it fixes key maping on Riponda Model S) but that didn’t do anything.

2

Regarding keyboard mode, please see this support note:

[https://cedrus.com/support/riponda/keyboard-mode.htm](https://cedrus.com/support/riponda/keyboard-mode.htm)

It looks like you have your Riponda using the XID protocol, which sends a lot of information followed by a carriage return (Enter). Any of the other three protocols will send only one byte.