Announcement

Collapse
No announcement yet.

Questions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Questions

    Hello,

    I have looked through the forum and the articles in which Superlab
    appears, and I can’t found the solution for my questions. I would like to
    conduct an experiment with subliminal priming, in which stimulus
    presentation takes only 15ms. Then I present a mask, next a word and
    finally I make a question, collecting reaction time in response.

    I would like to know if Superlab enables this requirement, and about the
    accuracy in record reaction times (I had read in the forum something
    about 10-12 ms).

    I will be very grateful to you if you could help me.

    I am looking forward to hearing about your news.

    Sincerely.
    Last edited by Hisham; February 10th, 2009, 11:15 PM.

  • #2
    It is important to realize that you cannot specify and obtain a stimulus presentation time of 15 ms. The presentation time will always be a multiple of the refresh time of your monitor + video card. For example, if your monitor has a 60 Hz refresh rate, this means that the refresh time is 1/60th of a second and an image can be drawn (or erased) only 16.6, 33.3, 49.9 ms, and so forth.

    When presenting stimuli, SuperLab 4.0 synchronizes with the refresh rate of the screen. To have your stimulus appear for one refresh time, set the time limit on your event to just 1 ms. This way, SuperLab will round up the time to the next refresh time.

    As for reaction time accuracy, 10-12 ms is about right when using a USB keyboard on Windows (slightly less on Mac OS).

    Comment


    • #3
      Thank you very much for you reply, Hisham.

      Sincerely,
      Rosario.

      Comment


      • #4
        subliminal priming redux

        I'm running Superlab 4.0.8 on a 2009 iMac (OS 10.5.8), and I can't seem to make my prime quite subliminal enough. I have a fixation cross (500ms), then a delay (500ms), then a prime (1 ms), then a mask (500ms), but I can still see the prime before the mask. Do I play around with what happens before stimulus presentation (e.g., erase screen), or something? Thanks.

        Comment


        • #5
          Make sure the times limit on the prime is 1 ms. This will cause the prime to be shown for one refresh rate (12-16 ms).

          Comment

          Working...
          X