Announcement

Collapse
No announcement yet.

StimTracker TTL inputs

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • StimTracker TTL inputs

    Hello,

    I am using Superlab and a StimTracker in conjunction with the STP100C. I am a little unclear about the 6 TTL input lines. I’d like to know if these can be used to send event markers from Superlab to Aqcknowledge. I know that the USB cable can be used to create event markers on 3 channels, but I am interested in having more event markers. Everything I’ve read implies that the ethernet cord is used for button boxes, but I am just wondering if it can be used to pass a digital signal from Superlab to Acqknowledge as well.

    Thanks!
    Emily

  • #2
    For sending event codes from SuperLab to Acqknowledge, the preferred method is USB, as you mention. The TTL Input connector does not have to be used with a response pad; it can be used with any general purpose TTL lines. You can always use a USB-based I/O device from National Instruments or Measurement Computing to send additional bits of information.

    Comment

    Working...
    X