Announcement

Collapse
No announcement yet.

Problem with installing driver for RB-730

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Problem with installing driver for RB-730

    I'm having a problem with installing the driver for the RB-730 response pad on my Windows PC (Windows XP, SP2). When I connect the response pad to my PC, it is detected as a "USB<-> Serial" device (is this all right?). I downloaded the driver file (the one below) and unzipped it as shown in the instruction.
    http://www.cedrus.com/support/rb_ser...s_07122003.exe
    But when I try to install the driver following the instruction, Hardware Wizard says it cannot detect necessary software. So the pad is detected but the driver cannot be installed. Has anyone else had this problem or know how to fix it?
    (I'm not sure if this is relevant, but all the DIP switches are in the down position.)

    Thanks in advance,

    Eiji

  • #2
    Hello Eiji,

    It seems like you have a response pad that was not programmed properly by the factory. When you first plug it to your computer, it should say "RB-x30 Response Pad" and not "USB <-> Serial" device. I'll send you a private message on how to arrange for a return.

    Sorry for the inconvenience,

    Hisham.

    Comment


    • #3
      Thanks, Hisham. I'm looking forward to your message. Eiji

      Comment


      • #4
        It looks like my initial guess about the response pad not being programmed properly by the factory was correct. The person who can configure it won't be able to do so for at least another week, so I asked our staff to send you a new replacement one today.

        Sorry about the inconvenience.

        By the way, when I connected the response pad to a Windows XP machine with the USB drivers already installed on it, I was able to use SuperLab -- only the name is different. A new box is on its way to you.

        Comment

        Working...
        X