Announcement

Collapse
No announcement yet.

RB x30 series response pad

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • RB x30 series response pad

    Hello,

    I would like to find out how to configure the Accessory Connector on the RB730 and RB530 response pads. Specifically, I would like to use the response pad to send a TTL signal to mark events on an EEG data stream. I'm not sure if this will be useful to know, but I'm using EGI's Net Station software for this.

    Thanks,
    Irene.

  • #2
    By default the accessory connector will send a pulse out whenever the button is pressed.

    Comment


    • #3
      No pulse sent on button press

      I'm getting no marker pulse sent to stimtracker when i press a button on rb530. the button press is recorded by superlab but no pulse. what's wrong?

      Comment


      • #4
        Do you blue lights on the Digital Input light up? If not, how about if you press all the keys down simultaneously?

        Comment

        Working...
        X