Announcement

Collapse
No announcement yet.

Accessory socket

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Accessory socket

    Hi,

    Re RB834.

    Is it possible to configure the accessory port as two inputs and four outputs?

    If so, what is the procedure?

    Best regards,

    Stefan

  • #2
    Technically, yes. The feature is not supported in SuperLab, but if you are programming your own code, then it is possible.

    The RB-834 is an XID device. The XID command set is described at

    Specifically, check out the A4 command:

    Comment


    • #3
      Hi,

      Many thanks for the reply.

      Regards,

      Stefan

      Comment

      Working...
      X