Thread Tools  
cnsla
Junior Member
 
Join Date: Apr 2012
cnsla is on a distinguished road Posts: 14
Little trick to use Stimtracker to STP100C, Posted August 31st, 2012 #1
I use Stimtracker and STP100C
It's little bit tricky to connect them.
(I'm failed to connect them using tiny board and DB37cable).

So, I connect Stimtracker with STP100C with DB25 cable from extra port(not DB37cable).

Than It's possible to Marking EM3,5,7 from superlab (It's enough in many case, you can use 7 different marking) and 1,3,5th button on response pad(in case of I/O cable connected).

Now, the problem is your 2nd button of Response pad cannot be marked.
I fixed this issue simply change the arrange of I/O cable connecting response pad and Stimtracker(actually, LAN cable, you can find anywhere).
When you change 2nd and 3rd line of I/O cable in one side, you can mark 1st and 2nd button independently on STP100C.

: )
Reply With Quote
MonikaT
Senior Member
 
Join Date: Mar 2008
MonikaT is on a distinguished road Posts: 1,279
Posted August 31st, 2012 #2
Have the signal adapter plugged into the back of StimTracker. The signal adapter provides a 37 pin connector that connects to the STP100C via the DB37 cable.

If you want to use the extra custom cable, you will have to use your own custom cable.
Reply With Quote
Tags
stp100c stimtracker
Thread Tools
Posting Rules
Forum Jump:
Copyright Cedrus Corporation, 1991-2014.
All times are GMT -7. The time now is 01:17 AM.