Thread Tools  
pedu
Junior Member
 
Join Date: May 2007
pedu is on a distinguished road Posts: 1
define buttoms for using in e-prime, Posted May 15th, 2007 #1
Hi

I did all the installations that I had to. Now I'd like to use the bottum box to register answers and reponse time in an e-prime experiment. For that, I should be able to define the buttons. How can I do this?

Thanks for your help!
Reply With Quote
Hisham
Founder
 
Join Date: Aug 2006
Location: San Pedro, CA
Hisham is on a distinguished road Posts: 1,202
Posted May 15th, 2007 #2
I am not familiar with E-Prime but it comes with an SRBOX sample that you can use. The important thing to remember is that our response pads work with E-Prime by emulating the PST Serial Response Box that PST makes. So from within E-Prime, you need to set things up as if you were doing it for that box.

You also need to make sure that our response pad is set to operate in SRB mode by flipping the right switch as described on this page:

http://www.cedrus.com/support/rb_ser...047_eprime.htm
Reply With Quote
Thread Tools
Posting Rules
Forum Jump:
Copyright Cedrus Corporation, 1991-2014.
All times are GMT -7. The time now is 03:46 AM.