Thread Tools  
LinoFuzi
Junior Member
 
Join Date: Feb 2016
LinoFuzi is on a distinguished road Posts: 5
Dear All,
we have recently acquired a Philips scanner with a SensaVue system, i.e. a stand-alone presentation system that integrate a Lumina controller.

I would like to know if there is any way to obtain the behavioral response (button presses) and the trigger signal directely from the Lumina controller. I need to use them with my laptop and the NBS Presentation software.

If so, how could I connect my laptop with the Lumina? It is only needed a USB cable or I should use some other port/cable?

Thanks in advance for your precious help.

L.Fuzi
Reply With Quote
Hisham
Founder
 
Join Date: Aug 2006
Location: San Pedro, CA
Hisham is on a distinguished road Posts: 1,132
Posted February 17th, 2016 #2
You will need:
  • A USB cable to connect the Lumina controller to Presentation
  • Install the USB driver

As for the trigger from the scanner, you can have that go directly into our Lumina controller, which would then forward that information on to Presentation.
Reply With Quote
LinoFuzi
Junior Member
 
Join Date: Feb 2016
LinoFuzi is on a distinguished road Posts: 5
Posted February 22nd, 2016 #3
Thank you for your response
Reply With Quote
LinoFuzi
Junior Member
 
Join Date: Feb 2016
LinoFuzi is on a distinguished road Posts: 5
Posted April 11th, 2016 #4
Dear HisHam,
I have followed your instruction, but I cannot be able to select a USB input on Prestentation.
My Presentation (version 18.3) does not include a USB input, but only serial and parallel inputs.

How can I fix that?

Thanks in advance for your suggestions.
Lino
Reply With Quote
Hisham
Founder
 
Join Date: Aug 2006
Location: San Pedro, CA
Hisham is on a distinguished road Posts: 1,132
Posted August 4th, 2016 #5
From Presentationís point of view, it is serial port. This is because, when the USB driver is installed, it emulates a serial port.
Reply With Quote
Tags
behavior, lumina, presentation, trigger
Thread Tools
Posting Rules
Forum Jump:
© Copyright Cedrus Corporation, 1991-2014.
All times are GMT -7. The time now is 11:47 AM.