Thread Tools  
HEPLab
Junior Member
 
Join Date: Jun 2015
HEPLab is on a distinguished road Posts: 2
Does StimTracker work with EyeLink yet?, Posted June 4th, 2015 #1
Hello,

I have an SR Research EyeLink eye-tracker - does Cedrus interface with that device yet? Thank you!

James
Reply With Quote
Hisham
Founder
 
Join Date: Aug 2006
Location: San Pedro, CA
Hisham is on a distinguished road Posts: 1,175
Posted June 5th, 2015 #2
My understanding from talking with someone at SR Research is that our existing parallel port signal adapter already works with their eye trackers.

Do you need dual outputs, i.e. an output to SR Research and another simultaneous output to EEG?
Reply With Quote
HEPLab
Junior Member
 
Join Date: Jun 2015
HEPLab is on a distinguished road Posts: 2
Posted June 5th, 2015 #3
Thanks for your quick response Hisham! Yes sometimes we'll need dusk output to our eye tracker and our EEG computer, while other times I might be to an eye tracker and a BioPac device. Are the stimulus codes sent via parallel port from the StimTracker, or via fine other kind of cable? I currently use a splitter parallel port cable to send these dual output signals from the stimulus presentation computer to the data acquisition computers. The data acquisition computers expect the signal to arrive via parallel port, but parallel ports have issues in general, which is why I'm curious hire StimTracker does this. Thank for your time! - Hands
Reply With Quote
Hisham
Founder
 
Join Date: Aug 2006
Location: San Pedro, CA
Hisham is on a distinguished road Posts: 1,175
Posted July 23rd, 2015 #4
James, sorry for the delay in responding. I hadnít realized that there was a follow up question.

There are two connectors on the back of StimTracker. When you want to interface with, say, a Biopac MP36, we provide a signal adapter kit that is specific to the MP36. It consists of a signal adapter block that plugs into both connectors on the back of StimTracker and provides a single MP36-specific connector on the other side, and it comes with a standard shielded cable that connects the signal adapter to the MP36.

For eye tracker support, we provide dual output support. This is different from splitting the signal. For the SMI and ASL outputs, itís a round mini DIN-8 connector that provides a more intelligent ORíd output. We do not have an SR Research model yet, but thatís only a matter of building the cable differently.
Reply With Quote
Tags
compatibility, eyelink, stimtracker
Thread Tools
Posting Rules
Forum Jump:
© Copyright Cedrus Corporation, 1991-2014.
All times are GMT -7. The time now is 11:32 AM.