Thread Tools  
alistairp
Junior Member
 
Join Date: Feb 2012
alistairp is on a distinguished road Posts: 2
Hi All,


I have just recently installed Psychtoolbox in MATLAB (2011b), operating in Ubuntu 11.10. Ptb in general seems to work fine.


I have issues trying to get PTB to initialize Lumina Box conneted to an USB serial port, which connects to a lumina response box (LSC-400). When I call CederusResponseBox('dev/ttylUSB0',['9600'])

the script hangs in an endless loop around line 1100 trying to send some bytes to the box and waiting for a response (which does not arrive).


I don't know why this is failing, i.e. it may be the USB to serial port interface is not correctly installed - and I don't know how one could test this.


In terms of a driver, so far I have only enabled a serial (RS232) port drive (dev/ttylUSB0) on Ubuntu linux. Here is the following link for that process: http://blog.mypapit.net/2008/05/how-...in-ubuntu.html


Does anybody successfully use a USB to serial port interface with matlab and Linux?

Thank
Reply With Quote
MonikaT
Senior Member
 
Join Date: Mar 2008
MonikaT is on a distinguished road Posts: 1,279
Posted February 20th, 2012 #2
If you are using the USB-to-Serial Port adapter that Cedrus sent with the Lumina system, the drivers are available from the following webpage: http://www.ftdichip.com/Drivers/VCP.htm
Reply With Quote
Thread Tools
Posting Rules
Forum Jump:
Copyright Cedrus Corporation, 1991-2014.
All times are GMT -7. The time now is 09:21 PM.