Thread Tools  
Dolly_Wen
Junior Member
 
Join Date: Nov 2013
Dolly_Wen is on a distinguished road Posts: 14
the location of light sensor, Posted January 6th, 2014 #1
Hi, I was wondering what is the recommended location for the light sensor. According to the website (http://www.cedrus.com/support/stimtr...set_visual.htm), we should put it near the edge of the screen. But we have found that the delay between the event codes sent from the computer and the onset detected by lightsensor is different if we put the lightsesor on the top-right of the screen or the bottom-right of the screen. The delay with top-right lightsensor is smaller. From the above website, it seems to suggest that middle-right is the best location of the light sensor. Am I right? Or should I choose the location where the smallest delay is found?
Reply With Quote
Hisham
Founder
 
Join Date: Aug 2006
Location: San Pedro, CA
Hisham is on a distinguished road Posts: 1,190
Posted January 6th, 2014 #2
Back in the old days of the CRT monitors, the recommended position would have been the same vertical position as the stimulus. Thatís because the screen was refreshed vertically, usually from top to bottom.

With the current flat LCD monitors, there is no need to refresh anything. The screen is updated, usually 60 times a second, and the way that they get updated changes from one LCD model to another. It also depends as well on the video card. So unfortunately, we cannot recommend a light sensor patch position.
Reply With Quote
Thread Tools
Posting Rules
Forum Jump:
© Copyright Cedrus Corporation, 1991-2014.
All times are GMT -7. The time now is 06:33 AM.