Thread Tools  
Junior Member
Join Date: Mar 2018
Yaojun1022 is on a distinguished road Posts: 2
Light sensor not detected, Posted April 3rd, 2018 #1
Light sensor seems to do not work when playing flashes in the monitor?
Have tried to adjust the sensitivity of light sensors from 1-100. But no LED was ever on.
Reply With Quote
Join Date: Aug 2006
Location: San Pedro, CA
Hisham is on a distinguished road Posts: 1,219
Posted April 3rd, 2018 #2
Which StimTracker generation are you using? 1 or 2? You can tell by looking at the label on the bottom. It will say either ST-100 or 2G.
Reply With Quote
Junior Member
Join Date: May 2018
ChesLans is on a distinguished road Posts: 1
Posted May 11th, 2018 #3
Hi...i think you're misunderstanding how the sensor works. The low threshold is active when any light is on the sensor, and the high threshold is active when a lot of light is on the sensor. In total darkness neither is active. If you want to detect darkness use a NOT gate with the low threshold output.
Reply With Quote
Thread Tools
Posting Rules
Forum Jump:
Copyright Cedrus Corporation, 1991-2014.
All times are GMT -7. The time now is 10:42 PM.